USING THE RADIO
17
RDS is a method for the transmission of additional information
from Radio Stations. It is only available in FM mode. For
example, the name of the radio station, the name of the
program or the type of program can be shown on the display.
It functions only when the broadcasting station has the RDS
transmission and the signal is strong enough.
Press “DISPLAY” on remote control to display the RDS
information. RDS contains the following informations:
PS (Program Service name)
PTY (Program TYpe)
CT (Clock Time)
RT (Radio Text)
Press the DISPLAY button on the remote until PS appears.
The current stations name will be shown.
NO PS will be shown if the signal from the radio
station is not strong enough or no such service is available.
A) PS (Program Service Name)
Note:
RDS (Radio Data System)
This receiver is equipped with a back-up memory. This
function ensures that radio preset, and sound adjustments will
be preserved if you experience power failures or you
disconnect the receiver from the power socket. The back-up
memory will preserve the radio presets and sound
adjustments for approximately one week/7 days.
If the power is disconnected for more than one week, the radio
presets and sound adjustments will be erased.
Back-up memory
B) PTY (Program Type)
Note:
C) CT (Clock - Time)
Note:
D) RT (Radiotext)
Note:
PTY SEARCH (Program Type Search)
Press the DISPLAY button on the remote until PTY
appears. The current type of the program will be shown.
NO PTY will be shown if the signal from the radio
station is not strong enough or no such service is available.
Press the DISPLAY button on the remote until WAITING CT
will appear. The current time from the radio Station will be
shown, e.g. 15:30
1. The Clock - Time will be only transmitted from the radio
stations once a minute, so you need to wait for less
than 1 minute to see the time.
2. NO CT will be shown if the signal from the radio station
is not strong enough or no such service is available.
Press the DISPLAY button on the remote until RT appears.
The text message will start to scroll across the display.
NO RT will be shown if the signal from the radio
station is not strong enough or no such service is available.
1. Press the PTY SEARCH button on the remote, PTY
SELECT will flash on the display.
2. Press the /- on the remote to choose the
program type, for example, NEWS, SPORT, etc.
3. Press the PTY SEARCH button again to choose the
program type shown in the display.
4. When the type of program is tuned in, it will stop searching,
otherwise, NOTHING will appear in the display.
PTY SEARCH
POWER
MCS-600
VOLUME
0
1
2
3
4
5
6
7
8
9
10+
TUNING
TUNING
STATION
STATION
CD
TUNER
AUX1
AUX2
DVD
TAPE
LINE IN
ST/MO
PTY
SEARCH
APS
MEM
AUTO
BASS
TREBLE
BALANCE
REPEAT
DISPLAY
LOUDNESS
MUTE
DISPLAY
Summary of Contents for MCS-600
Page 1: ...Instruction manual MCS 600...
