background image

WARNING: IT IS IMPORTANT THAT YOU READ AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE
INSTRUCTIONS ON THE UNIT. KEEP THIS MANUAL FOR FUTURE REFERENCE.
This unit was designed and manufactured with a view to providing maximum safety for the user. Incorrect use of the unit
may cause electrical shock or fire. The protection devices built into this unit will protect the user if the procedures below are
observed in connection with installation, use and repair. This unit is fully electronic and contains no parts that can be
repaired by the user.
DO NOT REMOVE THE CABINET. RISK OF DANGEROUS VOLTAGE. ONLY QUALIFIED TECHNICIANS ARE ALLOWED TO
REPAIR THE UNIT.

Heat

Do not place the unit near sources of heat such as radiators,
heat registers, ovens or other units that produce heat.

Water and moisture

The unit must not be placed close to water, such as bathtub,
wash basin, kitchen sink or laundry tub, in a damp cellar or
close to a swimming pool, etc.

Cleaning

Unplug the unit before cleaning. Do not use liquid detergents
and aerosol cleaning agents. Use a dry cloth.

Power cords

Wiring must be organised to prevent people from stepping on
the cables and to avoid pinching by objects placed on or
beside them. Take special care around sockets and plug boxes
and where the power cords leave the unit.

Overloading

Make sure that wall sockets, extension cords and plug boxes
are not overloaded as this may lead to fire or electrical shock.

Read the manual

Upon unpacking the unit, please read the manual carefully
and observe all the instructions given.

Power supply

Only the power supply indicated on the rating plate must be
used for this unit. If you are not sure which power supply you
have, please contact the distributor or the local electricity
supplier.

Earthing or polarisation

If the plug cannot be inserted properly into the socket, or if the
plug does not fit, the unit must not be used in your country.

IMPORTANT SAFETY INSTRUCTIONS

Ventilation

The cabinet is provided with slots and openings to ensure
ventilation and reliable operation and to protect the unit
against overheating. Do not block or cover these openings.
The openings must never be blocked, for instance by placing
the unit on a bed, a sofa, a carpet or similar surface.

05

Summary of Contents for MCS-600





















Reviews: