en
1.Press to turn on the power without removing the control panel from the device.
2.After is displayed, press
.
3.Select your ID number using the and buttons.
4.Press to confirm.
5.After is displayed, remove the control panel from the device and carefully
step barefoot onto the measuring platform.
6.Step off the measuring platform when you hear it beep.
The device automatically turns off after measurement results have been displayed.
When you are finished reviewing your measurements, return the control panel to its
original position.
・
If you have entered a nickname into the app settings and connected the body
composition monitor to your smartphone, your nickname is displayed instead of
your ID number.
Enter your ID number and take measurements without using auto-recognition. Use this method if using auto-recognition repeatedly
causes the device to switch to ID select mode, etc.
Place the body composition monitor on a hard, flat, stable floor.
14
・
If you step onto the measuring platform before is displayed,
or
is displayed and the power turns off during measurement.
・
Please refrain from moving during measurement.
・
Measurements cannot be taken accurately if the control panel is being held or
resting on the floor before is is displayed.
Note:
Note:
Measuring with an ID Number
(Call Measurement)
