background image

 
 

W W W . T A N N E N - P A R A D I E S . D E

 

 

- 5 - 

Information on the motor and the noise level 

The drive unit: motor: Bosch; type GWS 21-230 H. 

Follow separate instructions of Bosch.   

Information on noise levels: 
T  Typical  noise  level  measured  on  the  unit  is  as  follows:  Sound  pressure  level  90  dB 
(A); Sound power level 103 dB (A). 
Values measured and determined according to EN 50 144. 
Wear hearing protection. 

Principle of operation 

Scope and permissible operation 

The drilling machine is designed exclusively for drilling trees with a height of 1 - 3 m and 
a  trunk  diameter  of  40  -140mm.  When  you  press  on  the  foot  pedal,  the  rotating  drill 
goes  up  in  vertical  direction  and  makes  a  conical  hole  at  the  end  of  the  trunk  so  that 
trees  may  be  placed  securely  and  vertically  on  Easyfix  exhibition  and  Christmas  tree 
stands, both outdoor and indoor. 
Machine/equipment can be used only in perfect condition, according to its intended use, 
specifications and safety instructions, in consideration of the dangers and following the 
user guide! 
Any misuse may result in damage to the machine and/or accidents. 

Operation incompatible with intended use 

1) Drilling other items. 
2) Short circuiting. 
3) Operation of the machine with different mains voltages. 

Operation 

Preparation 

1) 

Put the guide bar in the chuck (back of the machine) and tighten the knob. 

 

 

 

Summary of Contents for EasyFix Type 4











Reviews: