CORDLESS APPLICATOR MAINTENANCE GUIDE
STEP 1
Unscrew the solution cup and empty any excess solution.
It is recommended this is done over a sink.
STEP 2
Rinse the empty solution cup with warm water.
STEP 3
Refill the solution cup with warm water and screw it back into the
applicator, turn the solution dial to “C”, and spray until the water
runs
clear.
Note:
Ensure the adjustable spray nozzle is attached.
STEP 4
Once a cup of water has run through, re-rinse the cup and empty.
Re-set solution dial to the regular spray setting of your choice.
STEP 5
Wipe any excess water from the applicator with a cloth and leave
it out to dry
Note:
Your Cordless system is NOT compatible with harsh cleaners such
as gun cleaners, chlorine bleach, or 100% ethanol. Using these cleaners
will cause damage to the system.
www.tanningessentials.co
Maintenance on the Applicator must be run at the end of each day the applicator is used.
Store your Cordless system in the carry case indoors in a cool, dry place below 50°c.
Do not leave excess solution in the cup.
