TROUBLESHOOTING
If you are experiencing problems with this unit, in the first instance please carefully read the
relevant sections of the User Manual and the Troubleshooting section below. If you cannot
solve your problem please contact your supplier for further assistance.
www.tanningessentials.co
PROBLEM
CAUSE
WHAT TO DO
My solution is
bubbling from
the cup
The air flow is
cutting in and
out
Seal is not fitted correctly.
The solution cup is not screwed
in correctly.
The solution cup is cross
threaded.
Solution cup is overfilled.
Battery might be low.
Airflow setting is set to MIN.
Fit seal correctly.
Unscrew and re-attach the solution
cup. To securely tighten, align the
unlocked symbol on the solution
cup with the dot on the applicator,
and twist the cup clockwise until
the locked symbol on the cup aligns
with the dot on the applicator.
Unscrew and re-attach the solution
cup. To securely tighten, align the
unlocked symbol on the solution
cup with the dot on the applicator,
and twist the cup clockwise until
the locked symbol on the cup aligns
with the dot on the applicator.
Empty some solution from the cup
and re-attach.
Place on charge.
Increase airflow to MAX by pushing
the power button a second time.
