TROUBLESHOOTING
www.tanningessentials.co
PROBLEM
CAUSE
WHAT TO DO
The solution is
splattering
System will
not turn on
System will
not charge
System is
leaking
The airflow setting is set to MIN.
Battery might be low.
The solution cup is too low.
The system has a flat battery.
Charging cord not attached
correctly.
Charger port is not pushed
into the wall socket.
Electricity is not turned on.
The solution cup is not screwed
in correctly.
Residual solution remains
in the system.
Increase airflow to MAX by pushing
the power button a second time.
Place on charge.
Add more solution to the cup.
Place on charge.
Remove, then re-fit charger.
Push charger plug firmly into
the socket.
Ensure power point is turned on.
Unscrew and re-attach the
solution cup.
You may need to depressurise
applicator, remove cup and hold
Cordless system over the sink and
pull trigger to drain residual
solution.
