PROBLEM
CAUSE
WHAT TO DO
Solution is
beading on
skin
The client
has tanning
solution in
areas they
do not wish
to tan
The client
appears to
be orange
The client has not prepared their
skin correctly i.e moisturiser or oil
based product residue may remain
on the skin.
The client may be excessively
hot and perspiring.
The technician has sprayed the
area incorrectly.
The client has touched a part of
their body with a spray-tanned
area.
Too much tanning solution has
been sprayed onto the skin.
The client may not have followed
rinse instructions for rapid tan.
The client may have a low
tolerance to DHA.
Dab area with a clean, dry towel
and re-spray lightly over the area
to blend tan. Client may even have
to remove product residue from
the skin before proceeding with
the tan application.
Dab area with a clean, dry towel
and re-spray lightly over the area
to blend tan.
Using a damp cloth, wipe the area
immediately, or once developed,
exfoliate the area using a tan
remover product.
Using a damp cloth, wipe the area
immediately, or once developed,
exfoliate the area using a tan
remover product.
Exfoliate the skin using a tan
remover product.
Exfoliate the skin using a tan
remover product.
Exfoliate the skin using a tan
remover product.
TROUBLESHOOTING
www.tanningessentials.co
