background image

WARRANTY INFORMATION

IMPORTANT
Please keep your proof of Purchase and User Manual in a safe place as 
you will require these to make a warranty claim. Prior to making a 
claim you should read through the trouble shooting section in the 
manual and contact your supplier via phone. Any warranty claims 
should be made directly to your supplier.

If within one (1) year from the date of purchase, the product fails due to 
a defect in material or workmanship, we will repair if possible or 
replace it free of charge with a comparable unit which may be new or 
refurbished. This warranty applies only to the original purchaser and is 
not transferable. The goods must be returned to the seller with proof of 
purchase to be assessed at the purchasers cost.

Warranties shall not apply to any defect, failure or damage caused by 
improper use or improper or inadequate maintenance and care. The 
manufacturer shall not be obligated under these warranties:
a) to repair damage resulting from attempts by personnel other than 

authorised representatives to install, repair or service the product,

b)  to repair damage, malfunction, or degradation of performance result-

ing from improper use or incompatible solution,

c)  to perform maintenance or cleaning or to repair damage, malfunc-

tion, or degradation of performance resulting from failure to perform 
user maintenance and cleaning as prescribed,

d)  to repair damage, malfunction, or degradation of performance result-

ing from use of the product in an environment not meeting the oper-
ating specifications,

To activate your warranty, please complete the information below and 
post to your supplier within 14 days of purchase.

Summary of Contents for Pro













Reviews: