TOWER ASSEMBLY
www.tanningessentials.co
STEP 6
Locate the foot pedal and power cord. Connect the power
cord to the shorter cord coming out of the foot pedal.
Connect the longer cord from the foot pedal into the
bottom fan unit of the tower. Find the connector cord
and insert the metal male end into the bottom fan unit,
and the female end into the middle fan unit. Plug the
power cord coming from the foot pedal into the wall
socket and turn on the wall switch. You will need to turn
on each fan unit at the back of the tower.
STEP 5
Locate the aluminium sides and peel off the protective
film. Insert the aluminium sides in between the fan units
and the loosely screwed-on metal support bars. Once
the side panels are inserted, starting from the top, tighten
the screws to clamp the side panels tightly into position.
(Note: these are reversible for two colour options)
