10
11. IMPORTANT SAFETY INFORMATION
·
Never expose the unit to moisture, water and extremes of temperature or
humidity. Specifically, the unit must not be exposed to dripping or splashing
and that no objects filled with liquids, such as glasses, shall be placed on the
unit. Do not operate adjacent to a radiator or heater. No naked flame
sources, such as lighted candles, should be placed on the apparatus. The
unit must not be covered by articles such as newspapers, table cloths,
curtains etc.
·
Never open the unit, as there is a risk of electric shock.
·
There are no user serviceable parts inside the unit. Always refer servicing to
your Tannoy dealer or authorised service agent.
·
Avoid violent shocks to the unit during packing or transportation.
·
Do not plug the unit into the mains until all other connections have been
made and checked.
·
Due to the powerful magnet within the i5 MP, do not place within 0.5m of a
television or computer monitor, unless your model is provided with magnetic
screening.
·
If not used for a long period of time, it is recommended that the apparatus is
completely disconnected at the AC mains socket.
·
This apparatus is designed for use in moderate climates.
A mains cable may be supplied with the product, having a moulded plug at one end
and a moulded mains plug appropriate to the country of use at the other end. Where
the moulded plug is fitted with a mains fuse, always replace with the same type and
rating.
If the fitted plug is unsuitable for your type of outlet sockets, it should be cut off and
disposed of safely, in case it is inserted into a live socket elsewhere. The wires in the
mains cable are coloured in accordance with the following code:
GREEN AND YELLOW
EARTH
BLUE
NEUTRAL
BRO WN
LIVE
AS THE COLOURS OF THE
WIRES IN THE MAINS CABLE MAY NOT
CORRESPOND
WITH
THE
COLOURED
MARKINGS
IDENTIFYING
THE
TERMINALS IN YOUR PLUG, PROCCED AS FOLLOWS:
The wire which is coloured GREEN AND YELLOW must be connected to the
terminal in the plug which is marked either by the letter E, the earth safety symbol
(
), or coloured GREEN or GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug
which is marked by the letter N or coloured BLACK.
The wire which is coloured BRO WN must connected to the terminal in the plug
which is marked by the letter L or coloured RED.
Ensure the terminals are tightened securely, and no loose strands of wire are
present. Ensure cord grip is clamped over outer sheath of cable, rather than over the
wires.
This equipment has undergone safety and EMC testing, and
complies
with
the European
Law
Voltage
Directive
and
Electromagnetic Compatibility Directive.
