Tannoy POWER V15, User Manual

12.5 SECUR – ET VTH 

Pole Mount 

12.6 SECUR – ET VCS 

Ceiling Saddle

12.7 SECUR – ET VPC

 Pole Clamp

The Tannoy V15 loudspeaker is fitted as 
standard with a  blanking plate on the base 
of the cabinet. However, should you ever 
wish to mount the V15 onto a standard 
35mm pole mount this blanking plate can be 
quickly and easily removed and replaced by 
a VTH pole mount. The same screws which 
secure the blanking plate should be used to 
secure the VTH in position. 

VCS 

The VCS ceiling saddle available in both 
black and white finishes, and is to be used 
in conjunction with the VMY and a length of 
M10 threaded rod (not supplied by Tannoy 
Limited). The VCS ceiling saddle allows the 
Tannoy V15 loudspeaker to be suspended 
at a user defined distance from the ceiling 
as shown in Figure 1. 

Included with the VCS is an M10 nut. This 
should be used to secure and lock the 
threaded rod in place at the top of the ceiling 
saddle. 

Fig 1. 

The VPC pole clamp can be used along with the 
VMY yoke bracket to suspend a Tannoy V15 
loudspeaker  from an overhead bar, truss or 
suitable structure. Only the parts supplied 
should be used to secure the VPC to the VMY 
yoke bracket. 
The following items are included with each 
VPC:-  

Description 

Quantity 

VPC Pole Clamp 

1 

M10 Washer 

1 

M10 x 50mm Screw 

1 

M10 Nyloc Nut (Black) 

1