background image

 
 
 
 
Care of the SuperTweeter

 

 
Two finishes of the enclosure are available, oiled walnut and lacquered black ash. For 
the black ash finish, simply wipe with a soft slightly damp cloth. 
 
The walnut enclosure has been hand waxed before dispatch from our finishing 
workshop. To maintain the natural wood appearance, it is important that only a wax of 
similar formulation is used. 
 
A jar of specially formulated wax is available from your authorised Tannoy dealer. 
This should be applied carefully (to avoid brass adjustment panel and terminals) and 
sparingly, with a soft lint-free cloth, such as muslin. 
 
The Performance Platform should only be cleaned with a soft slightly damp cloth, and 
shined with a soft duster. 
 

Under no circumstances should chemical cleaning agents be used.

 

 
 

 
 
Warranty and Service 

 
Your Tannoy SuperTweeter will operate for many years without trouble provided it is 
not misused. The high peak power handling of Tannoy loudspeakers will allow 
responsible use with larger amplifiers on wide dynamic range material.  
 

Take care with any amplifier, irrespective of power output, to avoid abnormal 
conditions such as switch-on surges or output overload (clipping) that may result 
in peaks of power greatly over the rated output. 
 

The SuperTweeter is warranted against manufacturing defects in material or 
craftsmanship over a period of 5 years from the date of purchase. This warranty is in 
addition to your statutory rights as a customer. Tannoy cannot however be held 
responsible for failures caused by abuse, unauthorised modifications, improper 
operation or damage caused by faults elsewhere in your system. 
 
The determination of the cause of failure will be made by Tannoy Limited or its 
authorised Distributor or Service Agent, based on physical inspection of the failed 
parts. 
 
If you suspect a problem with your SuperTweeter, in the first instance discuss it with 
your Tannoy Dealer. The dealer has the expertise and experience to help you 
troubleshoot the system and assess the situation. 
 
If you continue to have problems, contact your Tannoy Distributor or Tannoy 
Customer Services at our Coatbridge address. 

 
 

Summary of Contents for Prestige SuperTweeter ST200














Reviews: