Adjustments
Referring to Table 1 again, select the sensitivity and crossover frequency settings to
suit your loudspeakers, and install the adjustment screws into the correct position on
the SuperTweeter adjustment panel (Fig. 3).
The rear support cone on the Performance Platform may be adjusted for height, then
secured using the locking thumb screw. If possible, adjust so that the SuperTweeter is
pointing at ear height when seated.
After double checking the wiring, you are now ready to switch your amplifier on.
Select some music you are familiar with, and gently advance the volume control to
normal listening level.
95dB
93.5dB
90.5dB
92dB
PRESTIGE
89dB
CROSSOVER FREQUENCY
MADE IN GREAT BRITAIN
SENSITIVITY
16kHz
14kHz
18kHz
ADJUSTMENT SCREW
Fig.
3
Running In
Like all loudspeakers, the drive unit in your SuperTweeter requires a while to reach
optimum performance, as the stresses in the materials relax. For this reason, it is
benefitial to run the system at fairly high levels at normal room temperature for
approximately 20 hours to reach best results.
Summary of Contents for Prestige SuperTweeter ST200
Page 13: ......
