SUB
TECHNICAl SPECIFICATION
TS801
TS1001
TS1201
Output Power
200w rms
300w rms
500w rms
low Frequency Response (-6dB)
29Hz
24Hz
21Hz
(Typical In Room)
Inputs
2 x Phono line level, 2 x speaker level
Input Filter
50-150Hz, 2nd order low Pass, with lFe Provision
Auto Mute
after approximately 15 mins in absence of Input signal
Driver Type
200mm (8”)
250mm (10”)
300mm (12”)
Enclosure Type
Closed Box, Forward Firing
Enclosure Volume
16 litre (0.57 cu. ft.) 23 litre (0.81 cu. ft.)
32 litre (1.13 cu. ft.)
Additional Features
mode Presets: audio, Video, night
Variable Phase Control, 0-180 degrees
shelf /- 6dB range, lower limit 35Hz
Parametric Equaliser (PEQ). +/- 6bB Range, 20-100Hz,
Wide Setting (Q=6), Normal (Q=3.5), Narrow (Q=2)
Infra Red (IR) Receiver Functionality
Enclosure Dimensions, (W x H x D)
300 x 300 x 280mm 340 x 340 x 305mm
365 x 365 x 355mm
Excluding Feet
11.81 x 11.81 x 11.02” 13.39 x 13.39 x 12.00” 14.37 x 14.37 x13.98”
Enclosure Weight
9.3kg (20.5lbs)
12.1kg (26.7lbs)
16.7kg (36.8lbs)
Mains Voltage
120V Nominal AC 60Hz, 230V Nominal 50Hz (Switchable)
Maximum Power Consumption
312Va
475Va
810Va
Mains Fuse
120V-T2al 250V
120V-T3.15al 250V 120V-T6.3al 250V
230V-T1al 250V
230V-T1.6al 250V
230V-T3.15al 250V
NOTE: Tannoy adopts a policy of continuous improvement and product specification is subject to change
without notice.
