13. Technical Specifications
VSXNET Subwoofer Operation Manual rev 2.0.0
27
PSU Specifications
Input Connector
Locking Neutrik Powercon
Locking Neutrik Powercon
Locking Neutrik Powercon
Voltage Selection
Automatic (115 / 230 V, 45 - 65 Hz)
Automatic (115 / 230 V, 45 - 65 Hz)
Automatic (115 / 230 V, 45 - 65 Hz)
Type
High current, high freq. switch-mode
High current, high freq. switch-mode
High current, high freq. switch-mode
Efficiency
> 90% typical
> 90% typical
> 90% typical
Input voltage
100 V / 115 V /
230 V n/- 10%
100 V / 115 V /
230 V n/- 10%
100 V / 115 V /
230 V n/- 10%
Mains fuse
External
External
External
Fuse type
T10AT
T10AT
T10AT
Other features
Automatic soft-start
Automatic soft-start
Automatic soft-start
VSXNET
12.2BP
VSXNET
15DR
VSXNET
18DR
Electronics
Efficiency
> 85% typically
> 85% typically
> 85% typically
Damping Factor
120 ref 8 Ω
120 ref 8 Ω
120 ref 8 Ω
Distortion
< 0.05% @ 1 kHz -3 dB output
(22 kHz handwidth)
< 0.05% @ 1 kHz -3 dB output
(22 kHz handwidth)
< 0.05% @ 1 kHz -3 dB output
(22 kHz handwidth)
Input Impedance
5.6 k Ω unbalanced,
11.2 k Ω balanced
5.6 k Ω unbalanced,
11.2 k Ω balanced
5.6 k Ω unbalanced,
11.2 k Ω balanced
Output Power (Programme)
1200 W
1200 W
1200 W
Input Sensitivity
1.4 V (+5.5 dBu)
1.4 V (+5.5 dBu)
1.4 V (+5.5 dBu)
System Type
Dual channel Class D (Bridged)
Dual channel Class D (Bridged)
Dual channel Class D (Bridged)
DSP system
Comms Facilities
Firmware updatable and selected
parameters editable
Firmware updatable and selected
parameters editable
Firmware updatable and selected
parameters editable
Communications
Serial - RS485
Proprietary message format
Serial - RS485
Proprietary message format
Serial - RS485
Proprietary message format
Dynamic Range
112 dB (A) typical
112 dB (A) typical
112 dB (A) typical
DSP
3rd generation SHARC
3rd generation SHARC
3rd generation SHARC
Sampling Frequency
96 kHz 24 bit A/D - D/A
word length
96 kHz 24 bit A/D - D/A
word length
96 kHz 24 bit A/D - D/A
word length
Format
1 IN = 1 OUT
1 IN = 1 OUT
1 IN = 1 OUT
