© Tansun Limited 2012 Part No. 043099 Issue. 1
F o l l o w i n g i n f o r m a t i o n i s o n l y f o r E U - m e m b e r s t a t e s :
The use of this symbol indicates that this product may not be treated as household waste. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local council, your household waste disposal service
or the shop where you purchased the product.
Fig. E
Fig. F
7. Remove the screw (Fig. F) from the side reflector and lift it up away from the heater to remove it. Repeat at opposite end to remove
other side reflector.
8. The lamp wires should be pulled out of the side slots and the lamp can be lifted up completely (Fig. G). The wires should be gently
pulled so they come out from behind the reflector.
9. The lamp should now be removed from the heater as shown in Fig. H.
10. Refit the new lamp in reverse order ensuring that no wires get trapped and all screws are fully tightened.
Fig. G
Fig. H
Reference Manual
Riviera Elite
Spectrum House, Unit 1, Ridgacre Road, West Bromwich,
West Midlands, B71 1BW, England.
Tel: +44 (0)121 580 6200 - Fax: +44 (0)121 580 6222
Email: quartzinfo@tansun.com - Website: www.tansun.com
