TAO TT-BH08, User Manual

05/06

How to Use

1.Charging

1)  Connect  the  charging  port  with  any  USB  charging  adapter  or             

active computer USB port

2) Charging will start automatically with LED indicator turning red 
3)  The headset is fully charged when LED indicator turns blue 

2.Pairing

To pair with other Bluetooth device, you must first bring the headset 
into pairing mode;
1)  Make sure the headset and your Bluetooth device are next to    

each other (within 3 feet);

2) Press and hold the multifunction button for approximately 3 

seconds to turn on the headset;

3)  Once the headset is on, it will go into pairing mode automatically  

with the LED indicator flashes red and blue alternately;

4)  Activate Bluetooth function on your phone and search for the 

nearby Bluetooth connection:

•

  For iPhone : Settings > Bluetooth > On;

• 

For Android : Settings >Wireless & Networks >Bluetooth: On > 
Scan for devices;

5)  Find “TaoTronics TT-BH08” in the search results. Tap on the name to 

connect. Once connected, only the blue LED will remain on. 

3.Pairing with two devices at the same time

Although you can pair with two devices, only one of them can play 
music with the headset at a time. To pair with two devices:
1)  Follow previous instructions in the “Pairing” section to pair the 

TT-BH08 with your first device; 

2)  Turn off the Bluetooth function of your first device, follow the 

“Pairing” instructions again to pair and connect to your second 
device; 

3)   With Bluetooth function on both devices turned on, simply restart 

the headset, it will automatically connect with both devices at 
the same time (within 5 seconds). 

4)  To switch between the two devices, simply pause the music on the 

first device and play music on the second device or vice versa. 

4.How to Wear 

Please wear the headset as shown in the diagram:

▲

Note:

Charge the headset at least once every 6 months when not using 
for a long time.

▲

Note:

•

  If a PIN code is required for pairing, please try “0000” or “8888” (4 

zeros or 4 eights)

•

  The Bluetooth headset can remember previous paired devices. If 

you have previously paired the headset with a device, simply turn 
on your device and the headset (by pressing the multifunction 
button for 3 seconds), they will connect automatically with no 
need to go into pairing mode. 

▲

Note:

• 

Please note the “L” and “R” markings on the headset, they 

correspond to left side and right side respectively;

•   

The curve of the ear hook is engineered to fit different ear shapes. 

You can adjust the ear hooks to best fit your ears; 

•

  In addition to the headset, two pairs of different size ear buds are 

included in the package. Please try them out and find the most 
comfortable fit for you.