IG-20-08-008-A
www.taoglas.com
Pole
Mount Installation
Loop the mouting straps around the pole at the desired
position and tighten the strap until the mounting plate
is fixed. Use the self centering feature to guide the
mounting plate onto the pole
Insert the metal mounting clamps(both top and bottom)
through the inner slots of the mounting plate
The TGX.45 antenna can be installed with 3 different methods: pole mount, wall mount, and suction
cup mount. Please refer to the appropriate section below that best fits your installation needs
Hardware Installation
Insert the ball joint firmly into the socket on the back of
the antenna body and slide the tightening nut into the
antenna housing’s back plate to secure in place. Adjust
to the desired antenna orientation on the bal joint and
tighten the nut to fix the antenna in place.
Insert the tightening nut onto the ball joint mount with
the flat surface facing away from the mounting plate
Completed Installation
Optional: Route cables through the cable guide on the
mounting plate