03
12
Air Fryer Oven
Air Fryer Oven
13
The air fryer oven
will not turn on
· Make sure the power cord is securely plugged
into the outlet.
· Make sure the oven door is closed properly.
· Plug in another appliance to the same plug to
test the circuit.
The troubleshooting guide addresses the most common problems.
If problems persist, feel free to contact the Customer Support at
support@taotronics.com
Remaining odor
The first few times you use your air fryer oven,
you may notice a plastic smell. This is normal,
non-toxic, and goes away quickly. It is
recommended to clean and preheat at 400°F
for 15 minutes to remove any remaining odor.
Dark smoke
comes out
· Immediately stop cooking and unplug the
oven. Allow it to cool to room temperature.
· Remove all accessories from the cooking
chamber and clean the area as well as all
accessories thoroughly.
White smoke
comes out
· Cooking greasy foods will cause oil to leak
into the drip pan. This oil will produce white
smoke. Try not to air fry foods with a high
fat content.
· Make sure the drip pan and the inside are
cleaned properly and not greasy after
each use.
Foods are
cooked unevenly
For more even browning and crispiness,
toss ingredients or turn the tray 180° halfway
through cooking cycle.
Flaking of
non-stick coating
Clean the cooking tray and drip pan with
moderate detergent and a slightly moist,
non-abrasive sponge or cloth.
Error code appears
on the display
E2 - Open circuit in thermal sensor
E4 - Short circuit in thermal sensor
Unplug it from the power source and contact
TaoTronics Customer Support.
Thanks for choosing TaoTronics Air Fryer Oven.
This product is covered with TaoTronics product and labor warranty for
12 months from the date of its original purchase.
The warranty will not apply in cases of:
- Accident, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purpose.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Manual,e.g. connection
to an unsuitable mains supply or non-compliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from
repairs, service, or alteration to the product or any of its parts that have
been performed by a repair person not authorized by TaoTronics.
We can only provide after sales service for products that are sold by
TaoTronics or TaoTronics authorized retailers and distributors. If you have
purchased your unit from a different place, please contact your seller for
return and warranty issues.
※
Please have your invoice and order ID ready before contacting
Customer Support.
WARRANTY AND SERVICE
