How to Use
Charging
1. Connect the micro-USB end of the charging cable to the
charging port of the Bluetooth adapter.
2. Plug the USB end of the charging cable to a USB charging
port or any active USB port.
3. The LED indicator will turn red when charging. It will
automatically turn off when the device is fully charged.
Note:
• You can use the adapter while it is charging.
• We recommend charging the unit for at least 2 hours before
using it for the first time.
Pairing
Pair in TX mode:
1. Turn on the Bluetooth on your device; make sure the adapter
and the device are placed within a 3 feet / 1 meter range.
2. Press and hold the Power Button for 5 seconds (LED indicator
flashes blue slowly) and tap twice to enter pairing mode (LED
LED Indicators
LED Indicator
Solid Red LED
LED Off
Flashing Red
and Blue
Flashing Red
Solid Blue LED
Flashing Blue
(Every 2 Seconds)
Status
Charging
Fully charged
Pairing in Transmitter
/ Receiver Mode
Low battery
Successfully paired
Powered on but not paired
with Bluetooth devices
Note:
• For first time use, once powered on, the adapter will
automatically enter pairing mode. Please follow the
instructions below on how to pair.
07/08
