TaoTronics TT-BH15, User Manual

LED Indicators

Status

Charging

Fully charged or off

In Pairing mode

Disconnected from the 

Bluetooth device

Paired with a Bluetooth 

device

Low battery

Incoming call 

LED Indicator

Red LED on 

LED off

Flashes blue and 

red

Flashes blue 

once every 3 

seconds

Flashes blue 

twice every 5 

seconds 

Slowly flashes red  

Fast flashes blue 

V4.1 + EDR

A2DP, AVRCP, HSP, HFP

aptX

33 feet (10 meters)

DC 5V

Approx. 7 hours

2 hours

67.5 x 2.6 x 2.75 cm

26.57 x 1.02 x 1.08 in

14.6 g / 0.48 oz

Bluetooth Version

Bluetooth Profile

Audio Codec

Range

Charging Input

Working Time

Charging Time

Dimensions

Weight

Note: 

•  During a phone call, press the Multifunction Button 

twice to switch the call between your phone and 
the earphones. 

•  The availability of Voice Control functionality 

depends on your smartphone.

Specifications

Note: 

The earphones will not automatically 

connect to a 

Bluetooth

®

device when switched on, 

please read the next section on how to connect to 

your 

Bluetooth

®

 device.

How to Use 

1.  Charging

1)  Connect the charging port with any USB  

charging adapter or active computer USB port.

2)  Charging will start automatically with the LED 

      indicator turning red.
3)  The earphones are fully charged when the LED 

     indicator turns off.

2.  Pairing

1)  Make sure the earphones and your 

Bluetooth

®

device are next to each other (within 3 feet / 

      1 meter).
2)  Press and hold the Multifunction Button for 5  

seconds to bring the earphones into pairing mode 

with the LED indicator flashing blue and red.

3)  Activate the 

Bluetooth

®

function on your phone 

and search for nearby 

Bluetooth

® 

connections:

•  

For iOS: Settings > Bluetooth > On

•  

For Android: Settings >Bluetooth: On > 

        Scan for devices
4)  Find “TaoTronics TT-BH15” in the search results. Tap 

on the name to connect. Once connected,the 

blue LED will flash twice every 5 seconds.

Note:

•  

If a PIN code is required for pairing, try “0000” 

   (four zeroes).

•  The Bluetooth earphones can remember previously

paired devices. If you have previously paired the 

earphones with a device, simply turn on your device 

and the earphones (by pressing the Multifunction 

Button for 3 seconds to turn on), they will connect 

to the last connected device automatically 

without going into pairing mode.

3.  Pairing with two devices at the same time

Although you can pair with two devices, only one of 

them can play music or make phone calls with the 

headphone at any time. To pair with two devices:
1)  Follow the previous instructions in the “Pairing” 

section to pair the TT-BH15 with your first device.

2)  Turn off the 

Bluetooth

®

 function of your first device 

and follow the “Pairing” instructions again to pair 

and connect to your second device.

3)  With the 

Bluetooth

®

 function on both devices 

turned on, switch between the two paired devices 

by pausing the music on the first device and 

playing music on the second device.

4.  How to Wear

Please wear the earphones as shown in the diagram:

05/06