Charging via Charger
5
Connect the USB cable, one end connects to USB port of the charger and the
1. Turn open the screw and push the SDHC cap up to open, insert the memory card into the slot
until the card is tightly fixed, pushes the SDHC cap downward and turn the screw close to
complete the installation.
2. Press lightly on the memory card to take out the card, wait till the card spring out and remove
the SD card.
Unique Split Design:
Provided with especially designed
connection cable for host device and
extended device, when connected it is very
convenient to make recording in different
position and different angle.
Summary of Contents for JH-1001HD The Shepherd
