7.
MAINTENANCE
Tapflo LPX series
47
Fig. 58:
Install Shims
Fig. 59:
Measure Clearance
3.
Choose a combination of shims (Figure 58, item 15) to achieve a thickness as close as
possible to the calculated amount. Do not exceed the calculated amount.
4.
Remove the bearing case screws (Figure 58, item 41), install the shims selected in Step
3, and re-install the screws. To provide clearance for the shims, move the shaft toward
the rear by tapping gently on the rotor with a soft-faced mallet or by installing two
screws in the jacking holes (item P) in the bearing case flange (item 14).
5.
Check the resulting back face and front face clearance (items M and N in Figure 59).
Adjust the shims as necessary.
Summary of Contents for LPX Series
Page 59: ...9 PARTS LISTS Tapflo LPX series 59 9 3 Model 25 1 to 50 1 Pump Parts B exploded view ...
Page 61: ...9 PARTS LISTS Tapflo LPX series 61 9 5 Model 50 2 to 100 1 Pump Parts A exploded view ...
Page 63: ...9 PARTS LISTS Tapflo LPX series 63 9 7 Model 50 2 to 100 1 Pump Parts B exploded view ...
Page 69: ...Tapflo LPX series 69 ...