6
7
SCOPE OF SUPPLY
Depending on the order:
Tapkey Smart Lock
› Basic length 30/30 mm
› Maximum installation length (without knobs):
80/80 mm + if necessary core pulling
protection (8,5 mm)
› 1 × fixing screw; battery (pre-assembled)
or
Tapkey Half Cylinder
› Basic length 30
› Maximum installation length (without knobs): 80 mm
› 1 × fixing screw; battery (pre-assembled)
On request: installation lengths greater than 80 mm,
additional designs according to technical datasheets.
Optionally available
› Knob tool
› Fixing bracket
› Battery pack
› Torx screwdriver T6
› NFC Transponders in different designs
FUNCTIONAL DESCRIPTION
All the access control components and therefore the
Tapkey Smart Lock leave the factory in a neutral state.
They are only “initialised” i.e. assigned to a Owner Card
shortly before installation. From this moment onwards,
programming can only be performed on the terminal
device from this Owner Card or from a Programming
Card authorised with this Owner Card. Therefore,
the owner of the Owner Card exclusively decides on
assignments and the allocation of authorisations. As
an alternative, authorisations can be stored on the
transponders.
Please note: Keep the Owner Card in a safe
place to which only authorised persons
have access. The Owner Card does not have a
locking function! If the Owner Card is lost, you
must contact your dealer.
Tapkey Smart Lock
The standard version of the Tapkey Smart Lock offers
complete security, flexibility and convenience. The
cylinder meets the current state of the art and offers
maximum protection against attempts at electronic and
mechanical manipulation.
Locking media (users) can be managed with numerous
access control functions (daily and weekly schedules,
etc.). The event storage function ensures the traceabi-
lity of door openings. Transponder-based identification
takes place on the outside of the door. From the inside,
the door is always used with the mechanical knob,
without identification.
The manufacturer assumes no liability for personal
injury or damage resulting from improper installation,
maintenance, operation or use.
