7
Now say "unit locator" and TapMemo will ask you if you want to turn the unit
locator on. We think you do, so please say "yes". Once turned on, TapMemo will
wait for you to whistle, yes, you heard right, whistle. Each time it detects a
whistle, it will wakeup and announce "TapMemo, unit locator" in the loudest voice
it can, as if to say: Here I am!
If you want to turn this function off, just access the “unit locator” function as
before, and TapMemo will ask you if you want to turn the unit locator off. "Yes" is
the correct answer.
Intermission: How are you doing so far?
OK. There are two more items under the “system setup” menu. The first one
helps you get up on time in the morning, or at least tries to. You guessed right,
it’s the “alarm clock”
Alarm Clock:
Access the “system setup” menu. Don't remember how? Just press the TapKey.
After the tone, say "system setup" and you are there!
Say "set wake up time" and follow the verbal instructions to set the alarm clock
to your desired (or mandatory) wake up time. Note that the alarm clock is a daily
alarm clock so it will go off once every 24 hours unless you decide to turn it off
using the "wake up" command on the main menu. Don't worry, you can learn
how to do that later.
When the desired wake up time is reached, TapMemo will gently try to wake you
by playing a short melody and by saying the time. This will continue for one
minute with an increasing volume unless you press the TapKey button and go
back to bed.
Last but not least TapMemo offers a function that keeps all of your personal
information safe: the “lock” function.
Locking and Unlocking TapMemo:
The lock mechanism has three functions:
a.
Setting the unlocking code
b.
Locking your unit
c.
Unlocking your unit
First, learn how to set your unlocking code (which you will use to unlock the unit).
The two other functions will be described later.
TapMemo arrives with a default unlocking code which is 555. How original. To set
your own personal unlocking code, do the following:
Access the “system setup” menu. Don't remember how? Just press the TapKey.
After the tone, say "system setup" and you are there!
Say "unlock code" and follow the verbal instructions to set your three-digit code.
Say your three-digit unlock code, one digit at a time, pausing after each digit
until you hear the single "go" tone before stating the next digit. We strongly
