background image

17

17

CARE & CLEANING

Fig. 3

• 

To avoid possible injury when removing or replacing the oven 

door, follow the instructions below carefully and always hold the 

door with both hands positioned away from the door hinge area.

• 

The door is heavy. For safe, temporary storage, lay the door 

flat with the inside of the door facing down.

To remove oven door:

1.  Open oven door completely (horizontal with floor - See Fig. 1).

2.  Pull the door hinge locks on both left and right door hinges 

down from the oven frame completely towards the oven door to 

unlock (See Fig. 2). A tool such as a small flat-blade screwdriver 

may be required.

3.  Firmly grasp both sides of oven door along the door sides (Do 

not use the oven door handle).

4.  Close the door to the broil stop position. The oven door will stop 

into this position just before fully closing.

5.  With the oven door in the broil stop position lift the oven door 

hinge arms over the roller pins located on each side of the oven 

frame (see fig. 4)

To replace oven door:

1.  Firmly grasp both sides of oven door along the door sides (Do 

not use the oven door handle - see fig 3).

2.  Holding the oven door at the same angle as the removal 

position, sit the hook of the hinge arm over the roller pins 

located on each side of the oven door frame (See Fig. 4). The 

hook of the hinge arms must be fully seated onto the roller pins.

3.  Fully open the oven door (horizontal with floor - See Fig. 1).

4.  Push the door hinge locks up towards and into the oven frame 

for both left and right oven door hinges to the locked position 

(See Fig. 2).

5.  Close the oven door.

Special door care instructions - Most oven doors contain 

glass that can break. Read the following recommendations:

1. 

Do not

 close the oven door until all the oven racks are fully 

positioned into the oven interior.

2.  Do not hit the glass with pots, pans, or any other object.

3.  Scratching, hitting, jarring or stressing the glass may weaken its 

structure causing an increased risk of breakage at a later time.

Removing and replacing the lift-off oven door

Oven door hinge 

locations

Fig. 1

Fig. 2

Fig. 4

roller

pin

hinge 

arm

Oven

door

Hinge

About

CAUTION

Summary of Contents for GEF351FSA





















Reviews: