Tappan Millennia 316000182, Owner'S Manual

6

Setting the Clock and

Minute Timer

To Set the Clock

When the range is first plugged in, or when the power supply to the range has

been interrupted, the display will flash "12:00".
1. Push 

.

2. Within 5 seconds, push and hold the 

 or 

until the correct time of

day appears in the display.

Note:

 The clock cannot be changed during any timed bake or self-clean

cycle.

To Set the Minute Timer

1. Push 

.

2. Push the 

to increase the time in one minute increments.  Push and

hold the 

 to increase the time in 10 minute increments. The timer can

be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note:

 If you push the 

 first, the timer will advance to 11 hours and 59

minutes.

3. The display shows the timer count down in minutes until one minute

remains. Then the display will count down in seconds.

4. When the set time has run out, the timer will beep 3 times. It will then

continue to beep 3 times every 60 seconds until 

is pushed.

Note:  

The minute timer does not start or stop cooking. It serves as an extra

timer in the kitchen that will beep when the set time has run out. The minute

timer can be used alone or during any of the other oven functions. When the

minute timer is in use with any other mode, the minute timer will be shown in

the display. To view other functions, push the function pad for that mode.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, push and hold the 

 or

 to increase or decrease the time.

To Cancel the Minute Timer before the set time has run out:

Push 

.

Note:

  The oven function will not work

if the time of day clock is not set.