S e t t i n g P r e f e r e n c e s
Network
Using Your Zodiac Handheld
129
3. From the End pick list on the Login Script screen, select any of the
following commands and enter additional information if a field appears:
•
Wait For.
Instruct your handheld to wait for specific characters from
the TCP/IP server before executing the next command.
•
Wait For Prompt.
Instruct your handheld to use a dynamically
generated challenge-response value from the server. You must enter
the challenge value into your token card. This generates a response
value which you must enter on your handheld. This command requires
two arguments that are separated by a vertical bar (|).
•
Send.
Transmit specific characters to the TCP/IP server to which you
are connecting.
•
Send CR.
Transmit a carriage return or LF character to the TCP/IP
server to which you are connecting.
•
Send User ID.
Transmit the User ID information entered in the User ID
field of the Network Preferences screen.
•
Send Password.
Transmit the password entered in the Password field
of the Network Preferences screen. If you did not enter a password, this
command prompts you to enter one. The Password command is
usually followed by a Send CR command.
•
Delay.
Instruct your handheld to wait a specific number of seconds
before executing the next command in the login script.
•
Get IP (for SLIP connections).
Read an IP address and use it as the IP
address for your handheld.
•
Prompt.
Open a dialog box that prompts you to enter text of some
kind (for example, a password or a security code).
•
End.
Identify the last line in the login script.
4. Repeat steps 2 and 3 to complete the login script.
5. Tap OK, and then tap OK in the Details dialog box.
