TARAL 850 Instruction Manual Download

Page: 31 / 102

USAGE OF FRONT DASHBOARD CONTROLS

Ignition Controls

Rotating Beacon Lamp

Working Light

Hazard Warning Light

Differential Lock Control

OFF  position:  Power  supply  to  the  tractor  is
off and the engine is not operating. In order
to  stop  the  engine  while  running  and  shut
down  the  controls,  turn  the  ignition  key  to
the  counterclockwise  to  this  position
(backmost).  When  the  ignition  key  is  at  this
position, or even there is no key, the hazard
warning light and horn continue to operate.

Ignition  position:  Power  supply  to  the
tractor  is  on  and  certain  circuits  are
supplied with electricity.  If there are any
controls  engaged,  associated  warning
lights  illuminate  on  the  dashboard.
Normally, battery charging and engine oil
pressure  warning  lights  should  illuminate
on  a  continuous  basis.    The  tractor  has  a
auto  glow  system,  when  the  ignition  key
is  turned  clockwise  from  off    to  this
position, glow system is engaged and runs
for  a  certain  period  of  time  to  facilitates
the initial operation of the engine. As long
as the glow system runs, the warning light
will  continue  to  illuminate  on  the
dashboard.  The  operating  time  of  the
glow  system  varies  according  to  the
temperature of the environment.
40-45 seconds @ -20°C
25-30 seconds @ 0

℃

1±0,2 second @+45°C
After the warning light goes off, the

engine starts to run, meanwhile the glow

system continue to run for another 20

seconds to facilitate the operation of the

engine. If the engine is operated before

the

warning

light

goes

off

(not

recommended), the light goes off and

relay continues to glow the plugs for 20

seconds.

Start  position:  When  the  ignition  key  is
turned clockwise after the glow plug warning
light  goes  off  from  ignition  to  this  position,
starter  motor  starts  to  run  and  the  engine
starts.  As  long  as  the  key  is  placed  at  this
position, starter motor continues to run.

Press the upper side of the

button to turn on the rotating

beacon lamp. The lamp continues

to illuminate as long as the

button is pressed. In order to

turn off the lamp, press the

bottom of the button. It is

obligatory to turn on the lamp

When the button is pressed,

working lamp turns on and

continues to illuminate as long as

the button is pressed. In order to

turn off the lamp, press the bottom

When the button is pressed,

differential lock is applied and

it continues to operate when

the button is pressed. In order

to turn off the lamp, press the

bottom of the button. When it

is engaged, an audible alarm

will

sound

warn

the

operator.

For

detailed

information,

see

operation

section.

When the button is pressed,

hazard warning light turns on and

continues to illuminate as long as

the button is pressed. In order to

turn off the lamp, press the

bottom of the button.

When  the  key  is  released,  it  turns  back  to
ignition  position  and  starter  motor  stops.  If
the  engine  starts  when  returned  to  the
ignition  position,  normally  the  battery
warning light and engine oil warning light go
off,  tachometer  moves  to  indicate  engine
rpm,  meter  starts  counting  and  hour  glass
starts to flash on the digital gauge.