ENGLISH
12
Smart Charger Function Example:
LEDs on at start
Analysis: Battery discharged /
Charging...
LEDs on halfway
Analysis: Battery partially charged /
Charging...
LEDS all the way on: All LEDs will be on for 5 seconds.
Analysis:
Battery charged.
stand by mode.
Power supply on
Power supply
in operation.
The LEDs light up as the power supply output
current increases.
The power supply has detected output variation or
is in fixed voltage mode.
The LEDs light up gradually, showing the charge
level, the more LEDs light up, the higher the
battery charge level. *See example below.
Very critical battery level detected (<6V)
connected to the power supply output.
Battery at very high level detected (>16V)
connected to the power supply output .
LED indicators & protection system
Condições
Smart LEDs
LEDs on
low intensity
2 LEDs on
Ammeter function
LEDs flashing 3x
LEDs Flashing 2x
LEDs flashing 6x per second
and continuously
LEDs flashing, 1 second on and
1 second off
3 LEDs flashing
3x
2x
6x
Short circuit detected at the power supply output.
The power supply automatically rechecks the
output every 5 seconds.
High temperature protection actuation. The power
supply shuts off the output and waits for the
internal temperature to decrease.
No battery connection or very poor quality battery.
The power supply is waiting for a new connection.
E.g: When removing the cable from one of the poles
or turning off the battery circuit breaker.
Smart Charger Function
Summary of Contents for SMART CHARGER AUTOCONTROL 120
Page 1: ......
