Front panel
1 - 19" RACK MOUNT HOLE:
Use these holes to fix the T 2400 on the rack.
4 - VOLUME:
Volume adjustment for channel A.
3 - SIGNAL LED:
Signal presence indicator for channel A.
5 - VOLUME:
Volume adjustment for channel B.
8 - ON / OFF SWITCH:
Turns amplifier power on and off.
7 - CLIP LED:
Indicates that the amplifier is operating at the distortion threshold of channel B.
6 - SIGNAL LED:
Signal presence indicator for channel B.
2 - CLIP LED:
Indicates that the amplifier is operating at the distortion threshold of channel A.
Rear panel
2 - OUT B:
Channel B power output for speakers. Follow the indicated polarity and the recommended minimum impedance (4 Ohms).
4 - INPUT:
Audio inputs (unbalanced) 1/4" or RCA input.
1 - AC POWER INPUT:
Connect the cable to the AC mains. This product operates with 120V AC or 240V AC (automatic dual voltage).
3 - OUT A:
Channel A power output for speakers. Follow the indicated polarity and the recommended minimum impedance (4 Ohms).
08
1
2
6
3
4
5
8
7
1
2
4
3
Illustrative Images
Illustrative Images
