6
3.2
Wind class
The canopy of the structure was subjected to FEM tests (Finite Element Method), which
resulted in determining the wind resistance in relation to the width and extension
of the
structure. The maximum pressure is 570 (N/m
2
), which represents the sum of the resistance
of forces acting on the structure, which in turn corresponds to the maximum wind speed of
110km/h
–
11 in the Beaufort scale.
Fig. 3 List of wind classes
–
Tarasola Flat
3.3
Electrical components for Tarasola Flat
Tarasola cooperates with the best suppliers on the market in order to ensure the highest
level of offered products. Thanks to the electrical components used in our products, we are
offering a comprehensive product to our Clients - the best on the market.
WARNING!
Due to the complexity and specificity of the product, installation shall
be performed by qualified personnel. Any actions inconsistent with the guidelines may
cause a potential threat and void the warranty.
ELECTRIC MOTOR. A motor with a built-in radio receiver and an electric limiter. Secure coding
system. Simple programming and maneuvering. All operations are controlled by the motor,
and it works at low speed. Operation via remote or local controller.
Installation remarks
The protection rating of a motor installed outside stands at IP 44. However, if the switch shall
be installed internally then its protection rating may drop to IP 40. The voltage supplied
to the motor must be 230 V. The wiring must be insulated.
Motor connection diagram is presented below.
