14
Before Operation-VCR part
How to use the main menu
This DVD+VCR can easily be programmed by using the
menus displayed on screen.
The menus are controlled by the remote control.
1. Switch on your TV set and DVD+VCR by pressing the
POWER
button.
2. Press
i
button.
The main menu will appear on the TV screen.
REC -
Timer recording setting (see p. 24).
PR SET -
Manual tuning setting (see p. 15).
ACMS -
ACMS (Automatic Channel Memory
System) (see p. 14).
SET -
Date & clock setting (see p. 13).
SYS -
To set the Colour TV System (see p. 13).
1 W ON/OFF -
Power Save Mode (see p. 27).
(Dr.) -
To check a problem with your VCR
(see p. 27).
F.OSD ON/OFF -
To display the operational
mode of your VCR
(see p. 26).
(16:9/4:3) -
To select the aspect ratio of your
TV (see p. 27).
DECODER -
To use a pay-TV decoder
(or Satellite) with your VCR
(see p. 26).
(OPR) -
To improve the playback picture
(see p. 21).
Appear when playback only.
O
NIC -
To activate or deactivate the NICAM digital
sound (see p. 26).
Tip
You can change the menu language on the DVD setup
menu. (See the Menu Language on page 18.)
3. Press
b
and
B
to select the desired menu.
Press
ENTER/OK
and use
v
or
V
to select.
4. Press
i
to return to a TV picture.
Tuning in TV Stations Automatically
If the TV broadcast signal is weak your DVD+VCR may
not detect the necessary information and will not be able
to store them correctly. To overcome this problem please
turn to the MANUAL TUNING section on page 15.
1. Press
POWER
to turn on your DVD+VCR.
2. Press
i
button.
The main menu will appear on the TV screen.
Press
b
or
B
to select the
ACMS
.
Press
ENTER/OK
.
3. Press
OK
to again to start the automatic tuning
process.
4. The
TV STATION TABLE
will appear when tuning is
completed.
Press
i
to save your settings.
Notes:
Please note currently only a limited number of TV
companies transmit the
Programme Delivery Control
(PDC)
signal which enables your DVD+VCR to suc-
cessfully identify and store them. If your DVD+VCR has
difficulty in identifying a TV station please turn the page
to find out how to manually tune in and name a TV sta-
tion. While automatic tuning is taking place the time and
date will set automatically.
If - - :- - appears in the DVD+VCR display it means that
the broadcast signal is weak and the clock was not set.
Please turn to CLOCK SET section of this book on
page 13.
SYS
1 2
SET
OSD
ON
OFF
OSD
f
SYS
1 2
SET
OSD
ON
OFF
OSD
f
ACMS
Pr-12
ACMS
Pr-12
OK
i
ACMS
OK
i
Pr-12
ACMS
OK
i
,
DELETE :
MOVE :
PSET
R
02
C03
00
03
C04
00
04
C05
00
05
C06
00
06
- -
- -
07
- -
- -
08
- -
- -
01
C02
00
BBC2
ITV
CH4
CH5
- - - - -
- - - - -
- - - - -
BBC1
01
C02
00
02
C03
00
03
C04
00
E
S
i
Pr-12
ACMS
BBC1
BBC2
ITV
en_gb_dpv-5400x.qxd 11.08.2005 20:08 Seite 14
