28
Display the playback information
You can check information about the disc, such as the total number
of the titles or chapters or tracks or time, using the Display function.
The information you want appears on the TV screen or/and on the
front panel display.
When playing back a DVD / DVD+/-RW / DVD+/-R
1.
Press
DISPLAY
repeatedly to show the relative information on
TV screen. ( The display will disappear after a few seconds. )
TITLE 02 / 05 CHAPTER 001 / 006
00 : 34 : 56
TITLE REMAIN
00 : 34 : 56
CHAPTER ELAPSED
00 : 01 : 23
CHAPTER REMAIN
00 : 03 : 21
2.
Press
DISPLAY
again, the information display is off.
Note :
Depending on the DVD, the title number or chapter
number or time may not appear or you may not be able
to change the display. The GOTO/DISPLAY function for
VCD discs only available for PBC OFF mode.
When playing back a VCD or CD
1.
Press
DISPLAY
repeatedly to show the relative information on
TV screen. ( The display will disappear after a few seconds. )
SINGLE ELAPSED
00 : 01 : 23
SINGLE REMAIN
00 : 03 : 21
2.
Press
DISPLAY
again, the information display is off.
Subtitle ( Selecting Subtitle Language )
This operation works only with discs on which multiple subtitle
languages are recorded.
1.
Press
SUBTITLE
repeatedly during playback to select the
different subtitle language.
2.
If the subtitle language is not necessary, press
SUBTITLE
to
select “SUBTITLE OFF ”.
Notes :
In some cases, the subtitle language is not changed to the
selected one.
When a disc supporting closed caption is played, the subtitle
and the closed caption may overlap each other on the TV
screen. In this case, turn the subtitle off.
When the desired language is not selected even if the button is
pressed, the language is not available on the disc.
When the power is turned on or the disc is replaced , select the
subtitle language again.
AUDIO (Selecting Audio Soundtrack Language )
This operation works only with discs on which multiple audio
soundtrack languages are recorded.
Press
AUDIO
repeatedly during playback to select the desired audio
language appears on the TV screen.
Notes :
When the desired language is not selected even if the button is
pressed, the language is not available on the disc.
When the power is turned on or the disc is replaced, select the
language again.
If the language is not recorded on the disc, only the available
language on the disc will be heard.
Language
when the playing disc is DVD story disc with multi- language, you
can press this button repeatedly to select the preferred language
for audio recorded.
Notes :
You cannot switch languages if there is only one language
recorded on the disc.
The maximum number of audio languages stipulated by the
manufacturers is 8/8.
Zooming
This function allows you to enlarge the picture on the TV screen
and to pan through the enlarged image.
1. Press ZOOM repeatedly to select a zoom factor as below:
ZOOM x 1.5
ZOOM x 2
ZOOM x 3
ZOOM OFF
2. To pan though the enlarged image, press
/ / /
buttons to
move the zoomed picture left, right, up or down.
