1.
Power On/Standby button
Switches on the DVD recorder or switches the
unit to standby mode
2.
OPEN/CLOSE button
Opens or closes the disc tray
3. Disc tray
Holds discs securely during recording or
playback
4. DISPLAY window
Shows operation information
5. HDD indicator
Lights when HDD (hard disk drive) is selected
as the target device
6. DVD indicator
Lights when DVD drive is selected as the
target device
7. HDD/DVD button
Changes DVD recorder’s current mode from
HDD (hard disk drive) to DVD and vice versa
8. SOURCE button
Selects equipment connected via line inputs
9.
RECORD button
Starts recording on current device
10.
PLAY button
Starts playback on current device
11.
STOP button
Stops playback or recording
12. DV-LINK (IEEE 1394) jack*
Connects digital camcorder
13. LINE IN (S-Video/Composite VIDEO &
AUDIO L/R) jacks*
Connects the outputs of external equipment
via S-Video or composite video/audio cables
Front View
* Connector is located behind front cover.
Rear View
1. VHF/UHF IN/OUT jacks
Connects antenna cables
2. AV OUTPUT (VIDEO/AUDIO L/R) jacks
Connects the inputs of external equipment via
composite video/audio cables
3. COMP OUT (COMPONENT) jacks
Connects the inputs of external equipment via
component video cables
4. SCART INPUT jack
Connects the output of external equipment via
SCART cable
5. SCART OUTPUT jack
Connects the input of external equipment via
SCART cable
6. HDMI DIGITAL OUT jack
Connects a TV or an AV amplifier (receiver)
with HDMI input jack (via HDMI cable)
7. Power Switch
Toggles the mains supply on/off
8. DIGITAL AUDIO OUT (OPTICAL) jack
Connects an amplifier or a receiver having an
optical digital input jack
9. DIGITAL AUDIO OUT (COAXIAL) jack
Connects an amplifier or a receiver having a
coaxial digital input jack
10. Fan
Provides appropriate cooling to the device
11. AC IN terminal
Connects the power cord
Targa DRH-5500x
User’s guide and service information
TARGA GmbH
Lange Wende 41
D-59494 Soest
Germany
www.targa-online.com
Ready for you:
www.targa-online.com
drh5500x_manualcover_ie_0702.qxd:Layout 1 30.05.2007 14:08 Uhr Seite 1