10
Connections
1.
Power On/Standby button
Switches on the DVD recorder or switches the
unit to standby mode
2.
OPEN/CLOSE button
Opens or closes the disc tray
3. Disc tray
Holds discs securely during recording or
playback
4. DISPLAY window
Shows operation information
5. HDD indicator
Lights when HDD (hard disk drive) is selected
as the target device
6. DVD indicator
Lights when DVD drive is selected as the
target device
7. HDD/DVD button
Changes DVD recorder’s current mode from
HDD (hard disk drive) to DVD and vice versa
8. SOURCE button
Selects equipment connected via line inputs
9.
RECORD button
Starts recording on current device
10.
PLAY button
Starts playback on current device
11.
STOP button
Stops playback or recording
12. DV-LINK (IEEE 1394) jack*
Connects digital camcorder
13. LINE IN (S-Video/Composite VIDEO &
AUDIO L/R) jacks*
Connects the outputs of external equipment
via S-Video or composite video/audio cables
The following sections introduce a step-by-step process to set up this DVD recorder. When more than one
setup option are listed at a specific stage, please refer to the option most suitable for your setup condition.
DVD Recorder Overview
Front View
When using the LINE IN jacks
By default, this DVD recorder automatically selects S-Video signal over the composite one when both input jacks are
used to connect to other devices. If you would like your videos to be imported from a specifi c source, you can either
change the default setting through Setup
Video Input/Output
Front AV Input, or use one set of the connections
at a time.
* Connector is located behind front cover.
