System Settings
31
4. When completed, press
to select ‘Exit’ or
another option to continue, then press
ENTER.
The DVD recorder will start searching for
the channel signal.
5. When the scanning process is completed, press
to select your desired option, then press
ENTER.
OK
If the scanning result is what you want, press
to select ‘OK’, then press ENTER.
Scan Next
If the scanning result is not what you want,
press
to select ‘Scan Next’, then press
ENTER.
The DVD recorder will then start searching
for the next available channel frequency.
Cancel
If you decide not to make any change, press
to select ‘Cancel’, then press ENTER.
6. To apply the frequency setting to other
channels, repeat steps 1-5.
7. When completed, press
to select
‘Exit’ or another option to continue, then press
ENTER.
VIDEO Plus+ Pro-
gramming System
The VIDEO Plus+ programming system is a
specially-designed feature for recording TV
programs. The system greatly simplifi es the timer
recording process, as it does not require users to
enter program information, such as date, channel
number and start/end time, which are all contained in
the PlusCode numbers. You can complete the timer
recording setup simply by inputting the PlusCode
number, which can be found in most newspapers, TV
listing magazines or online sources.
As channel numbers may vary depending on
where you live, it is suggested that you build
up a matching channel list when you fi rst set
up the DVD recorder. This process will help
you to make use of the VIDEO Plus+ system
for future timer recording settings.
1. Press TV(MODE) or press SOURCE to set
‘TV’ as the signal source.
By default, pressing TV(MODE) allows you
to switch to TV directly. However, if you
have activated the ‘SCART Bypass’ mode
earlier through Setup menu, you can only
press SOURCE to switch to TV.
If you press SOURCE, you may need to
press the button more than once to switch
to ‘TV’.
2. Press EDIT to display the Channel Editor menu.
3. Press
to select a TV channel, then
press ENTER.
4. Press
to select ‘GCN’, then press ENTER.
5. Press
or number buttons (0-9) to enter
the GCN (Guide Channel Number), which is the
channel number used by the VIDEO Plus+
system, then press ENTER.
6. To set GCN for other channels, repeat steps 3-5.
7. When completed, press
to select
‘Exit’, then press ENTER.
For more information about Video Plus+ timer
programming, see "VIDEO Plus+ " on page
55.