T
ime Shif
t
57
Time Shift
Please note that if the source materials you are viewing are copy-protected, you will not be able to make
use of the ‘Time Shift’ function.
Before you start...
Check whether you have switched your TV’s input source to corresponding option (e.g. VIDEO 1, LINE 2, etc.), so that
signal from the DVD recorder can appear on screen. For further information, please check the instruction manual offered by
your TV manufacturer.
Check whether the channel scanning process for your TV is completed.
Setup Menu (Tuner) (p.24)
Pause Live TV
1. Press CH+ and CH- to select a desired channel.
2. Press TIME SHIFT to pause the program you
are currently watching.
The scene displayed on the TV screen will be the
last picture shown when you press TIME
SHIFT.
3. Press
PLAY when you decide to go back to
watch the program. The program will then be
played back from where it is interrupted.
4. Press
PAUSE/STEP to pause playback.
Press
PLAY again to resume playback.
Press
F. F. to fast-forward playack.
Press
F. R. to rewind playack.
5. Press TIME SHIFT to switch off the function,
and return to the normal TV-viewing mode.
The maximum time for live program pause is 2
hours.
Record & Play
1. During recording or timer recording, press
PLAY to start playback of contents recorded on
the hard drive.
2. Playback will then start from beginning of the
recorded session.
3. Press
PAUSE/STEP to pause playback.
Press
PLAY again to resume playback.
Press
STOP to stop playback.
Press
STOP again to stop the recording
completely.
The function is applicable to video titles
recorded on hard drive only.
You can only use this function when the
recording has been in progress for at least 10
seconds.