78
Timer Recording
Problem
Possible Solutions
Timer recording does not work
properly
Check whether the system time/date is correct.
Check whether the timer program is set to correct time and channel.
Check whether you have inserted a recordable disc.
Recording result is not completed
Check whether there is a schedule overlap. If so, go to the Timer Record
menu to reset one of the overlapped programs.
Press DISPLAY to check whether there is enough space on the disc.
In case of timer recording with VPS/PDC make sure you switch off the
DVD recorder, so that the VPS/PDC setting of your timer program can
function properly.
Sound
Problem
Possible Solutions
No sound
Check whether the audio cable is correctly and securely connected.
Check whether the audio cable is damaged.
Check whether the input source setting on the amplifier is correct.
There is no sound when playback is paused or is set for slow motion.
Press
PLAY to resume regular playback.
If the audio signal does not come through the DIGITAL OUT jacks,
please check whether related settings (on Setup menu) for the audio
output are correct.
The sound from the recorder is not
presented properly or is distorted
Check whether the audio cable is correctly and securely connected.
Check whether the audio cable is damaged.
Make sure the amplifier/receiver or TV is set to the correct input and the
volume is switched on.
If the sound is distorted, try cleaning the cable plugs.
Playback
Problem
Possible Solutions
Cannot play back a disc
Check whether the disc inserted is supported by the DVD recorder.
If the disc inserted contains videos recorded on other DVD recorders,
check whether the disc is finalized. In some cases, the DVD recorder
may not be able to play a finalized disc due to the type of disc or
condition of the recording.
Discs recorded with copy-once materials can only be played on CPRM
(Content Protection for Recordable Media)-compatible players.
Check whether you have inserted a blank disc.
Check whether the way you insert the disc is correct. Insert the disc with
the label side up. If there is no label on the disc, please check with the
disc retailer.
Check whether the disc’s region code is the same as that of the recorder.
Check whether the parental control function is switched on. If so, you
have to unlock it first. (Default password for the function: 0000 [zero])
Cannot play back from HDD
Check whether there are titles or files on the hard drive.
Check whether the titles or files on the hard drive are supported by the
DVD recorder for playback.
