58
Controlling Your TV with the Supplied Remote
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.
You can control your TV using the buttons below.
By pressing
You can
POWER
Turn the TV on or off.
AV/INPUT
Switch the TV’s input source
between the TV and other input
sources.
PR/CH +/–
Scans up or down through
memorized channels.
VOL +/–
Adjust the volume of the TV.
Controlling other TVs with the remote
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
code.
1. While holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV (see the table below).
2. Release TV POWER button.
Code numbers of controllable TVs
If more than one code number is listed, try entering one
of them at a time until you find the one that works with
your TV.
Manufacturer
Code Number
LG / GoldStar
1 (Default), 2
Zenith
1, 3, 4
Samsung
6, 7
Sony
8, 9
Hitachi
4
otes
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
If you enter a new code number, the code number
previously entered will be erased.
When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
TV Control
Buttons
RC174P1_NA4UTTA_S_48T_ENG 7/24/06 2:07 PM Page 58
