Receiving TV Programmes
Targa Visionary LT 2210
22 - English
Renaming a Channel
You can name a channel with any name containing up to five characters.
Proceed as follows:
Press
T
or
S
(6) on the remote control to select the channel preset that
stores the channel you want to rename.
Press the red button (15) on the remote control to select the existing name.
The first character will be highlighted.
Press
T
or
S
(6) on the remote control to select the desired character.
Press
W
or
X
(6) on the remote control to select the next digit of the name
and repeat the above process until the station is renamed.
Press the red function button (15) to store the channel name or press the
green function button (14) to cancel and to restore the old name.
Resorting Channels
To resort the channel list you can swap the preset channels pairwise. It is also
possible to use this function to store a different channel on the preset whose
original channel has been deleted.
Press
T
or
S
(6) on the remote control to select the channel preset that
stores the channel you want to swap.
Press the yellow function button (28) on the remote control to start the
moving process. The selected channel preset becomes marked in red.
Press
T
or
S
(6) on the remote control to move the red mark to the channel
preset where you want to move the previously selected channel to.
Press the red function button (15) to swap the channels or press the green
function button (14) to cancel.