SilverCrest SBKO 4.0 D1
66 - English
First use
Switching the headphones on/off
Switch on the headphones by pressing the multifunction
button (5) for at least 2 seconds. You hear an
ascending tone sequence in the headphones. The LED
(7) flashes orange and thus indicates standby mode. If
the headphones were switched on for the first time and
had never been connected to a device, pairing mode is
started automatically. The LED (7) alternates between
flashing blue and orange in pairing mode. Read the
next section when connecting your device.
Press the multifunction button (5) for at least 3 seconds
to switch off the headphones. You hear a descending
tone sequence in the headphones.
Connecting headphones
Proceed as follows to connect the headphones to your
playback device or smartphone:
Switch off the headphones.
To start pairing mode, press the multifunction button
(5) for at least 6 seconds until the LED (7) alternates
between flashing blue and orange.
The headphones are now in search mode. In search
mode, you can connect a compatible device to the
headphones via the Bluetooth
®
function.
