TARGA TM-2100
English
5
Features and Characteristics
• The TARGA TM-2100 mixing console has jacks for 10 input channels from which
you can mix 4 stereo and 2 mono channels on an EFX or collectively on the stereo
output MAIN OUTPUT.
• Via the CONTROL ROOM or HEADPHONES industry-standard jacks you can ei
-
ther listen to the mixed master stereo signal or the signal input to the TAPE IN jacks
beforehand.
• The mixing console has two AUX SEND jacks and one AUX RETURN jack. Effect
processors and monitor equipment can be connected via the two independent AUX
jacks.
•
Devices such as condenser microphones can be powered via the Phantom power
supply when optionally powered on via the microphone input.
• The mixing console has INSERT jacks for the input channels 1 and 2. Via these
jacks the signals of various effect processors can be fed to the individual channels.
• For channels 1 and 2 there are both XLR jacks for the connection of microphones
and also conventional TRS phone jacks. For input channels 7/8 there is a TRS
phone jack as well as an RCA jack (often also termed "Cinch"). These multiple audio
connectors enable you maximum flexibility for connecting to many sound sources,
such as microphones, standard Line-Out output devices, stereo synthesizers, etc.
• Each channel has its own equalizer, via which you can raise or lower the low, mid
and high frequencies of the individual input devices independently from each other.
