1
2
3
4
5
6
A
B
B 5
display
D
ISPLAY
Nothing appears on the screen.
possible cause:
The system is in a power saving mode (except
Suspend
to Disk
).
indicator:
The power switch status icon,
, islit or flashing.
solution:
Press a key on the keyboard. Toggle the suspend key
combination (see
Chapter 1: Introduction
, Hot Key Con-
trols).
possible cause:
The system is in the
Suspend-to-Disk
mode.
indicator:
The power switch status icon,
, is off.
solution:
Turn the system off and then on again to reboot the sys-
tem. If it still doesnt work, connect the AC power and
try again. Leave the computer attached to AC power so
that the battery has a chance to recharge. Recharging
takes about two hours with the system turned off.
possible cause:
The computer is set for a different display.
solution:
Toggle the screen display key combination (see
Chapter 1:
Introduction
, Hot Key Controls). If this works, the next time
you bootup you should go into
Setup
s Main menu, Boot
Options sub-menu and change the Display setting (see
Chapter 4: Firmware
). If an external monitor is connected,
turn it on.
.
