1
2
3
4
5
6
7
8
1 8
Introduction
Kensington Lock
This is a standard security port.
[
PS/2 Port
] Use this with any standard PS/2 external
keyboard or mouse. For details, refer to
Chapter 2:
System
, TouchPad.
rear view
¯
PS/2 Note
You can only use one
type of PS/2 device per
system session. If you
want to use a different
device (mouse or key-
board), you must shut
down and restart the sys-
tem. However, you can
detach and reconnect
the same device during
a system session.
[
TV-out
Jack] This is explained in
Chapter 2: System
.
[
External Monitor
] Use this port with any standard
color VGA monitor. For details, refer to
Chapter 2:
System.
[
Expansion Port
] With the main hinged door closed,
connect to this port through the sliding door. The op-
tional docking stations manual has more information.
[
Parallel Port
] This port supports several standards:
Standard AT (Centronics)
Bidirectional
Enhanced (EPP) -versions 1.7 & 1.9
Extended Capabilities (ECP)
Most printers use the Standard mode. The
Setup
s
Help bar (refer to
Chapter 4: Firmware
) explains how
to adjust this setting. Your peripherals manual explains
how to configure the device.
This port also serves as the external FDD connection.
Refer to
Chapter 3: Modules
for more on this feature.
¯
Printer Note
Your operating system
may include drivers for
many printer models.
Consult your printer
dealer for the most recent
driver for your model, as
this can greatly affect the
performance of the
printer.
