1
2
3
4
5
6
7
8
2 18
S y s t e m
USB setup
When the card is in correctly, the sys-
tem beeps once. If the PC Card is not
detected, check if the correct drivers
are loaded.
R
EMOVING
A
PC C
ARD
Push the appropriate eject button to
remove the card. The system will beep
twice when the card is ejected.
USB D
EVICES
Like the PC Cards, your computers USB
system uses technologies which are
newer than
Windows 95
. These require
some modifications to your system de-
scribed in the side-bar.
Once your system is setup, you should
refer to the USB devices manuals on
how to operate them.
¯
USB and Related Chipset
Setup for Windows 95
Enabling the USB features is a two-stage pro-
cess which must be followed in order:
S
TAGE
1 USB
SETUP
:
Run the Usbsupp.exe utility from Microsoft.
This may be included on the CD-ROM con-
taining
Windows 95.
When the system re-
starts, continue to Stage 2.
S
TAGE
2 C
HIPSET
SETUP
Run the Intel 82371xb INF update Installer
ver1.0 . When this is installed, the system
will go through a re-detection process,
which may require several restarts of the
system (just follow the on-screen instruc-
tions).
