1
2
3
4
5
6
7
8
2 20
S y s t e m
U
SAGE
Once your fax/modem is setup, you
still have to configure the software that
will use it. For the most part, this means
working with your operating systems
Network settings.
Be sure to keep the original installa-
tion software handy as you do this.
Additional information about how to use
the fax/modem (e.g.
ATdfcom.pdf
file
for AT commands) is included with the
accompanying
Drivers/Utilities
CD-ROM
.
¯
Setting up the Fax/Modem (cont.)
W
INDOWS
NT 4.0
1. Diable
COM2 I/O Settings
in the BIOS
Setup
(see Chapter 4: Firmware).
2. Install
Windows NT4.0 Service Pack 3 (SP3).
3. Navigate to
i386
sub-folder on the SP3 CD-
ROM. Highlight
PnPISA.inf
, then click right
mouse button and choose
Install
. When
prompted, close any other applications and al-
low to restart.
4. After system resumes, the
Add New Hardware
Wizard
appears. Insert the
Drivers/Utilities
CD-
ROM. Click on
OK > Browse
and navigate to:
D:\drivers\options\modem\win95&98&nt4\Ltmodem.inf
5. Follow the programs dialog boxes to copy
the files. When prompted, choose LT Win
Modem from
Model
list.
6. When
Resource
panel appears, click on
Set
Configuration Manually
. Choose any
unconflicting device, such as Basic con-
figuration 0001, from the
Setting Based on
option (there are 10). When the installation
is complete, reboot the system.
7. When the computer restarts, click
Modems
icon in the
Control Panel
to continue the
setup(the modem should be assigned to
COM2).
Fax/Modem
