1
2
3
4
5
6
7
8
3 12
M o d u l e s
D
RIVERS
& U
TILITIES
The Zip or LS-120 module must be in
the Drive bay before you can install
the their respective tool suite. Although
the
Windows 9x
and
Windows NT4.0
al-
locate the resource automatcially, you
still need the tools provided with the
accompanying
Drivers/Utilities
CD-ROM
for many of the necessary controls.
When the Zip or LS-120 installation is
complete, the Zip/LS-120 drive pushes
the CD-ROM back one letter (i.e. if the
CD-ROM is drive D:, it will become
drive E:, and the Zip/LS-120 will be
the new D:). If the Zip or LS-120 is
not present at the next boot-up, the CD-
ROM reverts to its original letter.
To prevent confusion, follow the in-
structions in the side-bar on page U-10
to fix the CD-ROM to one letter.
¯
Zip Tools Installation
W
INDOWS
9
X
/W
INDOWS
NT 4.0
Make sure the Zip drive is installed before you turn
on the computer.
When the operating system
starts up, it automati-
cally detects, and assigns the Zip drive to the letter
after the hard disk drive(s), pushing the CD-ROM
back one letter. The default driver recognizes the
Zip as a Removable Disk but it lacks many neces-
sary utilities provided by Zip tools. To install,
1. Insert the
Drivers/Utilities
CD-ROM.
2. From the
Start
button (on the tool bar), select
Run...
. Click on
Browse
... and navigate to:
E:\drivers\options\zip\English\setup*
*This assumes your CD-ROM is drive E: and your oper-
ating system is English version.
3. Click
Open
, and follow the programs dialog
boxes to install the tools (default installation is
recommended).
4. When the installation is complete, the com-
puter will ask to reboot. Do so.
5. When the computer restarts,
Iomega Tools
will
be added to the
Start
menu.
Zip/LS-120
