10
step 04:
Do not completely tighten screws until all screws are in place.
1. Attach the tube connector (J) to the beam (B), secure with M6*30mm bolt with washer (P) using the allen wrench (T).
2. Attach the U-shaped part 2 (H) to the beam (B), secure with M6*55mm bolt with washer (Q), plastic washer (V) and nut (R)
using allen wrench (T) and wrench (U).
3. Repeat above steps until 4 shade rods (E) and U-shaped part 2 (H) are secured with the beam (B).
B
B
B
B
B
B
B
H
H
H
H
E
E
E
E
J
J
R
P
P
V
Q
2.
1.
(Part P)×8
M6*30mm bolt with washer
(Part T)×1
allen wrench
(Part R)×4
nut
(Part Q)×4
M6*55mm bolt with washer
(Part U)×1
wrench
(Part V)×4
plastic washer
